The power miracle – the semi-mobile scrap shears of the upper class.
CNS 730 / 190 MTC
The CNS 730 / 190 MTC is used to expand the successful container shear series with a shear with a shear force of 730 t. The cutting principle with a horizontal knife slide has been retained and the overall construction has been strengthened. To obtain correspondingly higher cutting force and performance, the hydraulics have been upgraded to higher performance logic control. This container shear is also available with either a diesel (186 kW) or an electric drive (2 × 75 kW).
Benefits
- Continuous feeding of the shears into the feed bunker while simultaneously expelling the cut scrap
- no complex pre-compression with wing covers
- Monitoring of the automatic operation of the shears by the excavator operator – no additional operator necessary
- Full mobility of the scissors within a few minutes thanks to extendable hydraulic feet for placing on a low loader
- Variable cutting lengths possible by using attachments on the cutting device
- High cutting performance of the scissors per shift with low energy consumption
- Low maintenance effort thanks to a maximum of 315 bar hydraulic pressure and the use of high-quality assemblies
- Mechanically machined, replaceable guide surfaces allow optimal knife play adjustment.
- Autonomous operation of the shears for up to 16 hours without refilling the diesel tank
- Central lubrication ensures minimal wear on the guides
- No foundation required: a flat surface is sufficient.
- Airtight encapsulated hydraulic circuit increases the service life (durability) of the hydraulic oil
- Bar scrap in cupola scrap quality is produced by knives arranged at acute angles and by using special internal funnels.
Areas of application
- Operation at scrap collection sites without a power connection
- as an additional unit to absorb capacity peaks on existing scrap shears
- for the pretreatment of scrap on shredders
- for processing scrap directly at the source
- as a cost-effective alternative to guillotine shears when using several container shears next to each other with a scrap handling device
- as a processing plant for contaminants from commercial waste that cannot be further processed in the shredder.
Technical data
| unity | CNS730/190MTC | CNS 400K | |
|---|---|---|---|
| External dimensions (LxWxH) | m | 7,95 × × 2,5 2,7 | 5,3 × × 2,5 2,7 |
| Sizes from Ø XNUMX m x XNUMX m length up to Ø XNUMX m x XNUMX m length | t/hour | 14 – 20 | 8 – 12 |
| cutting power | kN | 7.300 | 4.000 |
| cutting width | mm | 1.500 | 1.600 |
| cutting length | mm | 500 | ~ 420 |
| Knife stroke | mm | 1.000 | 800 |
| Cycle time | Knot. | 18 – 22 | 20 – 25 |
| Diesel consumption | l/t | 1,4 – 1,8 | 1,3 – 1,5 |
| Tank capacity (diesel) | l | 450 | 160 |
| Drive power diesel/electric. | kW | 168/2×75 | 96/75 |
| Total weight | t | 44 | 25 |